Architectural Restoration Candle Making Concrete Casting Prototyping Sculpture Taxidermy Special Effects  Life Casting Spraying Rubber And Plastic

FAQ   Video Library

Find Your Nearest Distributor

Order Online

 

Press Releases Seminars

Body Double™ "Apply-to-Skin" Mold Rubber

Body Double™ “Standard Set” and Body Double™ “Fast Set” are long lasting silicone rubbers that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate!

One Casting or Many . . . For About The Same Price:  unlike alginates, which are good for one only casting, Body Double™ will last for many castings of almost any material including plaster, Matrix Neo, wax, resins (Smooth-Cast urethanes, polyester, etc.), Low-temperature melt metal alloys, etc.  And the amount of Body Double™ used per mold is less than most alginates, so the cost per mold is about the same.

• Body Double™ “Standard Set” for larger surface areas.  Working time of 5 minutes and a demold time of 20 minutes*

• Body Double™ “Fast Set” for fast turn around.  Working time of 90 seconds and a demold time of 5 minutes*

 *Depending on material temperature, ambient temperature and body temperature.  See Technical Bulletin for full details.

DO NOT USE THIS PRODUCT WITHOUT READING
THE TECHNICAL BULLETIN AND MATERIAL SAFETY DATA SHEET

Body Double™ Standard Set Starter Kit

Kit includes "Standard Set" Body Double™ rubber and all the supplies you need to make a mold and support shell of a moderately sized area of the body (face, hand).  This kit gives you everything you need to get an idea of what the material is all about.

Standard Set Starter Kit includes: • One 2-lb. Trial Unit of Body Double™ Standard Set      Silicone Rubber • One 1-oz. Body Double™ Release Cream • One 4” x 5 yds. Roll of Plaster Bandage • Two Mixing Sticks • Two 2-oz. Measuring Cups • One 10-oz. Mixing Cup.

Body Double Standard Set Starter Kit = $67.15

See My Cart / Check Out

Body Double™ Fast Set Starter Kit

Buy the Fast Set Starter Kit once and have the manual dispensing gun for future use. 400 ml. cartridges can then be purchased as need.  The starter kit comes with everything you need to do a face mold or a hand mold.

Fast Set Starter Kit includes: • One 400 ml tube set of Body Double™ “Fast Set”    Silicone Rubber • Two static mixing tubes • One 1A:1B pbv 400 ml cartridge dispenser • One 3.5 oz  jar of Body Double™ Release Cream • Two 4” x 5 yds. Rolls of Support Shell Plaster    Bandage Material

Body Double Fast Set Starter Kit = $114.25

See My Cart / Check Out

Body Double™ Silicone Rubber

Trial Sizes and Gallon Units of Body Double "Apply-to-Skin" Standard Set Mold Rubber.
[•Mold rubber only - no accessories•]

Body Double Trial Size = 2 lbs. = $48.55
Body Double Gallon Unit = 18 lbs. = $393.30

addproduct.asp" onSubmit="this.QUANTITY.quantityBox=true;return sfCheck(this);" name="Mult70554">
Body Double Standard Set - Trial Size Please Select Product Size Body Double Standard Set - Gallon Unit
Quantity:

See My Cart / Check Out

Body Double™ Release Cream

Body Double™ mold rubber will not readily stick to the skin, but will encapsulate body hair.  Not using Body Double Release Cream or using the wrong release cream may be a very painful experience!  Body Double Release Cream is a special blend of skin-safe, skin-softening conditioners that will not inhibit curing and will ensure that Body Double™ rubber will release from the body. 
A little goes a long way.  A 3.5 jar is more than enough to coat your entire body.

Body Double Release Cream 1-oz. Jar = $2.25
Body Double Release Cream 3.5-oz Jar = $6.80

addproduct.asp" onSubmit="this.QUANTITY.quantityBox=true;return sfCheck(this);" name="Mult53341">
Body Double Release Cream - 1 oz.Body Double Release Cream - 3.5 oz. Please Select Product Size
Quantity:

See My Cart / Check Out

Plaster Bandages for Support Shells

Plaster bandage material is immersed in water and layered over the cured Body Double™ mold rubber.  Bandages dry and form a rigid support shell (or "mother mold") that holds the rubber mold in shape during the casting process.

Bandages available in 4" and 8" widths x 5 yards.

4" x 5 yds. Plaster Bandage Material = $3.60 each
8" x 5 yds. Plaster Bandage Material = $6.15 each

addproduct.asp" onSubmit="this.QUANTITY.quantityBox=true;return sfCheck(this);" name="Mult57951">
Plaster Bandages 4-in. Roll Please Select Product Size Plaster Bandages - 8-inch roll
Quantity:

See My Cart / Check Out

Dispensing Guns for 400 ml Cartridges

Dispensing guns hold Body Double 400 ml cartridges and force the Parts A & B through
a static mixing tube.  Squeeze the handles of the manual gun, pull the trigger on the pneumatic gun.  The pneumatic gun requires that you have an air compressor with 100 psi minimum, and is excellent for frequent molders and larger projects.

	Manual Gun = $68.50
	Pneumatic Gun = $360.00 (Air Hose Not Included)

addproduct.asp" onSubmit="this.QUANTITY.quantityBox=true;return sfCheck(this);" name="Mult70554">
Body Double Manual Dispensing Gun Please Select Cartridge Gun Type Body Double Pneumatic Dispensing Gun
Quantity:

See My Cart / Check Out

Static Mixing Tubes

Static mixing tubes are compatible with 400 ml Body Double cartridges and mix the silicone rubber as it is forced through.

1 Bag of 10 = $12.50

/addproduct.asp" onSubmit="this.QUANTITY.quantityBox=true;return sfCheck(this);">
Quantity:

See My Cart / Check Out