|
EZ~Spray
Junior |
|
| |
|
|
Overview - What
Is It & What Can You Do? |
|
| |
|
|
EZ~Spray
45 Urethane Rubber - For making sprayed rubber molds used to
cast concrete, plaster, wax, etc. Surface preparation
(applying sealing agent + release agent) required.
EZ~Spray
Silicone Rubber - For making fast sprayed rubber
molds that have the best release properties for production
casting of resins, plaster,
etc. Minimal surface preparation required. |
 |
| |
Spray urethane or silicone rubber for making molds of any
original model. |
|
EZ~Spray
Urethane Plastic - For spraying over cured rubber
molds to make fast support shells / mother molds. Plastic can
also be sprayed into rubber molds to make fast, lightweight
castings. |
|
|
EZ~Spray Rigid Foam -
Make lightweight castings, create special
effects or use for lightweight reinforcement. StyroCoat
Styrofoam Coating - Coat large areas of styrofoam
quickly with a plastic that is impact resistant. Can
then be sanded, primed and painted. Great for creating themed
environments, theater and movie special effects. |
|
| |
Spray urethane plastic to make fast, strong mother molds or
castings. |
| |
|
| |
|
|
EZ~Spray Junior
Advantages |
 |
| |
| Lower
Cost (In The Short-Run) - No up front expense to buy a
spray machine ($18,000 and up). |
| |
|
Convenient and easy to use - If you have a compressor, you
can spray rubber, plastic or foam. Bring EZ~Spray Junior to
any job site. |
| |
Spray urethane plastic to coat styrofoam for theming &
special effects. |
Time To
Finish Any Project - Coat styro foam,
make molds or castings faster. |
|
| |
|
| |
 |
| Time &
Labor Savings - No Cleaning & No Maintenance |
| |
| |
| |
| |
Spray rigid foam that is flame rated for making fast
lightweight castings (see foam rock above) or special effects. |
See how EZ~Spray Junior can
work for you. The CD-ROM plays
on any PC. Call your Smooth-On distributor or
click
HERE. |
 
Click to Read/Print Manual
|
| |
Smooth-On