|
|
New
Mold Max Stroke™
Brushable Silicone Rubber |
| |
|
 |
Mold Max Stroke™ is a brushable tin silicone rubber that
self-thickens for making fast brush-on molds of almost any model. Properly
applied, it will hold a vertical surface and will reproduce the finest
detail. Mixed 100A:10B by weight, rubber quickly develops thixotropy and can
be applied with a brush or spatula. Working time is 20 minutes, re-coat time
is 45 minutes and cure time after the final layer has been applied is 16
hours at room temperature. Mold Max Stroke™ silicone will not stick
to most surfaces and will cure with negligible shrinkage to a strong,
flexible Shore 30A rubber. 4 thin layers is all that is necessary to make a
strong and durable production mold for casting wax, gypsum, concrete or
resins (urethane, polyester, etc.). Applications include reproducing
sculpture, architectural restoration, making candle molds, casting pewter,
etc. |
|
Smooth-On